4. Tools with bore

4.3 Standard profiles
4.3.2 Finger Jointing

Minifinger joint cutter

Finger Jointing

Tipped minifinger cutter in rugged design in different cutting materials depending on workpiece material, with single brazed on HS special fingers to minimise breakages. Minifinger joint cutter, standard and double cutting width, HS special fingers.

Finger length 10 mm, pitch 3,8 mm
WF 620-2-05 *

Class.	D mm	SB mm	BO mm	Z	ZA STCK	QAL	n max.min^-1	ID Nr. ZL 10/10		ID Nr. ZL 10/11
*	160	28,6	50	2/2	7	HS-spec.	8000	120010	•	120012	•
*	160	55,2	50	2/2	14	HS-spec.	8000	120011	•	120013	•
*	160	28,6	50	3/3	7	HS-spec.	8000			120016
*	250	28,6	50	3/3	7	HS-spec.	6000			120014	•
*	250	55,2	50	3/3	14	HS-spec.	6000			120015	•

Finger length 15 mm, pitch 3,8 mm
WF 620-2-05 *

Class.	D mm	SB mm	BO mm	Z	ZA STCK	QAL	n max.min^-1	ID Nr. ZL 15/15		ID Nr. ZL 15/16,5
*	170	28,6	50	2/2	7	HS-spec.	8000	120110	•	120112	•
*	170	55,2	50	2/2	14	HS-spec.	8000	120111	•	12011	•
*	260	28,6	50	3/3	7	HS-spec.	6000			120114	•
*	260	55,2	50	3/3	14	HS-spec.	6000			120115	•

Finger length 20 mm, pitch 5,0 mm
WF 620-2-05 *

Class.	D mm	SB mm	BO mm	Z	ZA STCK	QAL	n max.min^-1	ID Nr. ZL 20/20	ID Nr. ZL 20/22
*	180	37	50	2/2	7	HS-spec.	8000	120202	120207
*	260	37	50	3/3	7	HS-spec.	6000		120208

Finger length 20 mm, pitch 6,2 mm
WF 620-2-05 *

Class.	D mm	SB mm	BO mm	Z	ZA STCK	QAL	n max.min^-1	ID Nr. ZL 20/20		ID Nr. ZL 20/22
*	180	33	50	2/2	5	HS-spec.	8000	120200	•	120203	•
*	180	64	50	2/2	10	HS-spec.	8000	120201	•	120204	•
*	260	33	50	3/3	5	HS-spec.	6000			120205	•
*	260	64	50	3/4	10	HS-spec.	6000			120206	•

Minifinger joint cutter

Finger Jointing

Tipped minifinger cutter in rugged design in different cutting materials depending on workpiece material, with single brazed on fingers to minimise breakages. Minifinger joint cutter, standard and double cutting width.

Finger length 4 mm, pitch 1,6 mm
WF 620-2 *

Class.	D mm	SB mm	BO mm	Z	ZA STCK	QAL	n max. min^-1	ID Nr. ZL 4
*	160	25	50	4	15	HS	8000	021543	•

Finger length 10 mm, pitch 3,8 mm
WF 620-2 *

Class.	D mm	SB mm	BO mm	Z	ZA STCK	QAL	n max. min^-1	ID Nr. ZL 10/10		ID Nr. ZL 10/11
*	160	17,2	50	2/2	3	HS	8000	021687	•	021691	•
*	160	24,8	50	2/2	6	HS	8000	021686		021690
*	160	28,6	50	2/2	7	HS	8000	021685	•	021689	•
*	160	55,2	50	2/2	14	HS	8000	021698	•	021699	•
*	160	28,6	50	3/3	7	HS	8000			021692	•
*	250	28,6	50	3/3	7	HS	6000			021693	•
*	250	55,2	50	3/3	14	HS	6000			120300	•

Finger length 15 mm, pitch 3,8 mm
WF 620-2 *

Class.	D mm	SB mm	BO mm	Z	ZA STCK	QAL	n max. min^-1	ID Nr. ZL 15/15		ID Nr. ZL 15/16,5
*	170	28,6	50	2/2	7	HS	8000	021694	•	021696	•
*	170	55,2	50	2/2	14	HS	8000	120400	•	120401	•
*	260	28,6	50	3/3	7	HS	6000			021697	•
*	260	55,2	50	3/3	14	HS	6000			120402	•

Finger length 20 mm, pitch 5,0 mm
WF 620-2 *

Class.	D mm	SB mm	BO mm	Z	ZA STCK	QAL	n max. min^-1	ID Nr. ZL 20/20		ID Nr. ZL 20/22
*	180	37	50	2/2	7	HS	8000	021729	•	021730	•
*	260	37	50	3/3	7	HS	6000			021731	•

Finger length 20 mm, pitch 6,2 mm
WF 620-2 *

Class.	D mm	SB mm	BO mm	Z	ZA STCK	QAL	n max. min^-1	ID Nr. ZL 20/20		ID Nr. ZL 20/22
*	180	33	50	2/2	5	HS	8000	021668	•	021669	•
*	180	64	50	2/2	10	HS	8000	021671	•	021672	•
*	260	33	50	3/3	5	HS	6000			021670	•
*	260	64	50	3/4	10	HS	6000			021673	•

Table for quantity of cutters page 266
• available ex stock
+ available at short notice

4. Tools with bore

4.3 Standard profiles4.3.2 Finger Jointing

4.3 Standard profiles
4.3.2 Finger Jointing